Home > All Products > Hybrid Stepper Motors > Rotary > M-23 NEMA 23 3.0 A 1.8° Stepper Motor

NEMA 23 Stepper Motor

Hybrid Stepper Motor

M-23 NEMA 23 3.0 A 1.8° Stepper Motor

Robust maintenance-free rotary NEMA 23 2-phase hybrid stepper motor. This motor has a high power density and is capable of high microstep resolution and quiet operation with minimal resonance when paired with our MForce or discreet PCB mount drive products.  Options include double shaft or incremental encoder. 

  • Motor size: NEMA 23 (57 mm)
  • Holding Torque range: 90 … 239 Oz-in / 64 … 169 N-cm
  • Current: 3.0 amps

Specifications

Torque-speed performance

Single stack length
Double stack length
Triple stack length
Test conditions

100% current with damper simulating load.

Motor Characteristics

PerformancenotesSingle LengthDouble LengthTriple Length
Phase current[Amps]3.03.03.0
Holding torque[oz-in]90144239
{N-cm]64102169
Rotor inertia[oz-in-sec2]0.002550.003680.0065
[kg-cm2]0.180.260.46
Phase inductance[mH]1.52.63.36
Phase resistance[Ohm]0.650.850.65
Weightoz16.921.235.3
gm4806001000

California Residents – Click here for Proposition 65 warning

Wiring & Mechanical

Motor wiring/connectivity

Flying Leads (RG)

Flying Leads (RG)

Description: Motor to 12.6 (32 cm) flying leads interface

MFG:
N/A
Housing P/N:
N/A
Crimp Pin P/N:
N/A
Crimp Pin QTY:
N/A

Notes: Motor wiring AWG22 (0.34 mm2) 12″ (32 cm) long.

Pin configuration
Pin # Signal Description
1 – Red ∅ A Phase A output
1 – Red/White ∅ /A Phase A return
3 – Green ∅ B Phase B output
4 – Green/White ∅ /B Phase B return

Differential Encoder Option

Differential Encoder Option

Description: 10-position press fit IDC

MFG:
N/A
Housing P/N:
N/A
Crimp Pin P/N:
N/A
Crimp Pin QTY:
N/A

Notes: Interface cable included

Pin configuration
Pin # Signal Description
2 +5V +5 VDC input
3 GND Ground
4 N/C Not connected
5 CH A- Channel A negative output
6 CH A+ Channel A positive output
7 CH B- Channel B negative output
8 CH B+ Channel B positive output
9 IDX- Index mark negative output
10 IDX+ Index mark positive output

Single-End Encoder Option

Single-End Encoder Option

Description: Single end optical encoder mounted at the factory. Encoder part number appends to the motor part number eg. M-1713-ES100.  This product is an add-on option and not sold independently of a stepper motor or MDrive integrated motor/driver product.

MFG:
N/A
Housing P/N:
N/A
Crimp Pin P/N:
N/A
Crimp Pin QTY:
N/A

Notes: Wire colors represent the ES-CABLE-2, which must be ordered seperately.

Pin configuration
Pin # Signal Description
1 – Brown GND Ground
2 – Violet IDX Encoder index mark (N/C 1000-line encoder)
3 – Blue CH A Channel A output
4 – Orange +5 VCD +5 VCD input voltage
5 – Yellow CH B Channel B output

Mechanical/Dimensional Information

Dimensions are in inches (mm)

Length L dimension – inches (mm)
Single 1.77 (45)
Double 2.13 (54)
Triple 2.99 (76)

Documents & Downloads

3D Models
Catalogs
Icon
October 2018
1.11 MB
Firmware - Released
Not available for this product.

Hardware Manuals
Not available for this product.

Product Datasheets
Icon
January 2020
821 KB
Software Manuals
Not available for this product.

User Interface Software
Not available for this product.

Accessories

When it comes to your form, fit and function requirements, don’t settle. Get precisely what you need working with us. We know motion.

Contact us with any questions about how we can help you with your motion application or for assistance with your IMS products.

Browse our resource section and find the most useful tools and documents for all our products.